MFT網站建構中,請勿下單購買
購物車 0

紐西蘭 Svord Peasant Cooper

NT$ 1,200.00


介紹

本款是2018款Svord Peasant Cooper

Svord Peasant Cooper是標準尺寸的農夫折刀,早先Svord推出過由兩塊鋁合金握柄片構成的農夫折刀,本款則是改成兩塊紅銅片作為握柄,做工則是維持Svord一貫的粗礦(請見以下說明)

此版本因為紅銅片重量的關係,握感比較沉,出廠狀態的紅銅版Svord Peasant,握柄表面就已經不是很光亮的狀態,只能說這家廠商真的不在意他們家產品的外觀阿!


★以下是一般版Svord Peasant的說明★
這把紐西蘭Svord Peasant工作刀
有著很樸拙的外觀和簡單的結構
這種款式的折刀稱為Firction Folder
在折合後會有一段由刀刃延伸出的根
刀打開後,藉由握緊刀柄產生的磨擦力,夾住延伸的刀根讓刀穩固
是一種歷史悠久的折刀形式

Svord Peasant如同他的名稱:農夫
是一把適合拿來使用的工作刀
原廠出廠時的狀態,外觀上相當的粗糙
木柄的磨除非常隨意,兩邊不對稱是常有的情況
偶而還會有奇怪的磨除角出現
開刃也是一樣,兩邊很不平均是正常的
刀刃背部偶而還有不平整的狀況
以比較嚴格的觀點看,原廠出廠時每一把幾乎都有瑕疵
以上請特別注意
若是您很在意外觀,千萬千萬請勿購買
不然您買了又要退貨,手續上很麻煩。

這把折刀非常適合自己改造
改刀柄,重新磨刀刃,甚至是重新設計刀柄
請搜尋Google: svord peasant mod,有很多改造案例可參考

Svord Peasant有著優異的鋼材熱處理
因此刀刃的保持性非常好
碳鋼材質也很容易磨,一下就可以磨利
熱處理的部份請參考下方翻譯文字。

關於Svord的熱處理:可參考以下翻譯文章

Adapted for SVORD Web from an excerpt o magazine.

截自SVORD ,關於BLADE magazine的報導:關於SVORD Peasant

以下由MFT翻譯,引用請註明出處。

Bryan Baker stresses the importance of correct aerodynamics in regard to edge shape and high carbon steel correctly heat treated. These are principals taught him by his mentor, Bohemil Nebesky. Baker combines these principals to make high performance knives. Like the name implies, Peasant Knives are tools for a low price - no frills or bells.

Bryan pays a lot of attention to the heat treating of his steel. He has boxes o blades from his own testing. Not only will his blades pass the 90 flex test, they will also cut 1/4-inch soft steel bolts with no edge damage. Legendary makers Frank Richtig, Rudy Ruana and Bill Scagel also cut steel with their blades and Baker's Peasant Knife blades are only 1/16 inch thick!

Bryan Baker先生強調刀鋒形狀空氣動力學以及碳鋼正確熱處理的重要性。

這是他老師Bohemil Nebesky教他的原則。Bryan Baker先生結合了這些原則創造出高品質的刀。像是這隻刀子的名稱一樣,Peasant (農民) Knives:是一把平價沒有多餘裝飾的刀子。

Baker先生付出許多心力在鋼材熱處理這件事情上,他有一大堆因用來測試而損壞的測試品。不僅因為他的刀子通過90度韌性測驗,並且拿他們來割 1/4吋的軟鋼螺絲,刀鋒是不會損壞的。傳奇名師如Frank Richtig,Rudy Ruana 以及 Bill Scagel,也曾用他們的刀子來割鋼材。然而,Peasant Knife的刀刃卻只有 1/16吋的厚度!!

The Peasant Knife will cut 1/4-Inch soft steel bolts with no edge damage.

The Test

First I pounded the Peasant Knife blade through inch soft galvanized bolts (not high tensile). There was no damage to the edge or back of the blade. This shows the toughness that can be achieved using excellent tempering procedures. Baker gave the go ahead to flex the Peasant Knife 90. I easily disassembled the knife and went to the vise. (Author's note: This is a destructive test.)

Baker's friction folder is 8 1/4 inches long in the open position.

The Peasant Knife flexed 90 with no edge cracking as per the American Bladesmith Society journeyman smith test. It also survived a 90 bend in the opposite direction, still with no edge cracking. Excellent toughness! Upon restraightening the blade snapped, but the toughness was impressive.

Baker provided another knife for the cutting evaluation. I sharpened the edge with a worn 400-grit belt and stropped it with jeweler's rouge on leather. Even though this produced a hair-popping edge, it only lasted four cuts on 3/4 inch manila rope.

I switched to a new 320 belt. This produced seven cuts. Still not satisfied, I used a worn 150-grit belt. Bingo! This produced the best working edge. After 30 cuts, I had to put on gloves because the locking hump was digging into my palm. The Peasant Knife cut a total of 50 times! The edge would still cut hair. (Authors note: This working edge is also obtainable by using an India stone.)

測試

首先我將Peasant Knife拿來切鍍鋅螺絲,刀刃的邊緣或是刀背都沒有損傷。這顯示了優異的鋼材熱處理所帶來的強度。Bryan Baker先生接著將Peasant Knife折彎90度。(破壞性測試)

Peasant Knife 折彎90度後,邊緣沒有碎裂,就如同美國刀藝協會他們做的測試一樣。Peasant Knife 在折彎90度後沒有碎裂,存活下來,有著優異的強度!雖然在重新打直後刀斷了,但它的強韌度令人印象深刻。

Baker先生拿另一把刀出來測試切割,我只用400grit的砂帶磨利刀子並在皮革上輕刮(strop),即便是這樣,它很輕易地就磨出銳利的刀鋒,用來割斷3/4吋的馬尼拉繩,利度維持了四次的切割。

我換了320Grit的砂帶,這次維持了七次的切割,再換成150Grit的砂帶磨,Bingo!這次創造出最佳的刃面。切了30次之後,我得要帶上手套了!Peasant Knife總共切了50次,刀鋒依舊可以割斷毛髮。(上面兩段翻譯,感謝網友litethru分享修正翻譯)

Overall

Baker's knives sharpen extremely quick. Edge holding is in the upper 10 percent of the knives I've tested. In a Baker knife you get an excellent piece for a good price.

總結

Baker先生的刀子很快就可以磨利。刀鋒的耐用度比其他刀子多出一成,品質優異而且相對平價!

規格

Svord Peasant Cooper

鋼材:高碳鋼high carbon steel
展開長:210mm
收合長:172mm
握柄長: 130mm
刃長:76mm
刃厚:2.26mm
重量:約122克
柄材:紅銅

紐西蘭製造

注意事項

1. 刀刃是碳鋼材質,使用後請清潔並保持乾燥,必要時上油保護,防止氧化。
2. Svord的做工非常粗礦,開刃隨便,會有摩擦痕跡等等,請詳閱下方說明,除非是刀刃有明顯缺口,否則都無法當做瑕疵品處理,完美主義請千萬不要購買。
3. 紅銅材質非常容易因為空氣接觸而改變表面顏色,不過這也是這種材質迷人之處,若要恢復光澤,可用金屬拋光膏處理恢復。